ECO Sanitizing Granules is residue free and stabilized against UV rays. It dissolves completely to maintain the free available chlorine levels that will keep your pool sparkling-clean.
Does not require pre-mixing
Dissolves quickly and leaves no residue
Contains 99% active ingredient (sodium dichlor), 55.5% available chlorine (dichlor)
METHOD OF APPLICATION: Broadcast the product evenly over a wide area in the deepest part of the pool with water circulating.
ROUTINE CHLORINATION: Throughout the pool season, adjust pH to 7.2-7.6 with appropriate pool care products. Follow label directions. Broadcast 3 oz. of this product per 10,000 gallons pool water every other day or as often as needed to maintain chlorine residual at 2-4 ppm. This quantity may vary depending on bather load, temperature and other conditions. Re-entry into treated pools is prohibited above levels of 3 ppm chlorine. As a preventative treatment, you should shock treat weekly to prevent pool problems which may occur when bathing loads are high, water appears hazy or dull, unpleasant odors or eye irritation occur, after heavy wind and rain storms, when temperatures are high, in case of colored water, or if algae develops with resulting green color and slimy feeling.
SHOCK TREATMENT: Adjust pH to 7.2-7.4 with appropriate pool care products. Follow label directions.
For Start-Up or Initial Shocking: With pump running and pool not in use, broadcast 1 lb. of this product per 10,000 gallons of water directly into the deep end of the pool. To prevent possible damage to pool surface, use a pool brush to disperse any granules that may have settled at the bottom of the pool. Repeat procedure after 24 hours if needed, to establish a chlorine residual of 2-4 ppm as determined by a test kit.
For Routine Shocking: Every two weeks with pump running and pool not in use, broadcast 1 lb. of this product per 10,000 gallons of water directly into the deep end of the pool. To prevent possible damage to pool surface use a pool brush to disperse any granules that may have settled at the bottom of the pool.
WATER BALANCE: To provide optimum product performance, swimmer comfort and crystal clear water, always maintain pH in the 7.2-7.8 range, total alkalinity in the 90-125 ppm range and calcium hardness above 200 ppm. Use a reliable test kit that measures all these ranges. Make necessary adjustments with the appropriate pool care products.